Turn off the main water valve, temporarily fix the leak if possible, and contact a professional plumber for a permanent solution.
Look for visible signs of mold, such as black or green spots on walls or ceilings, and a musty odor. You can also have a professional mold inspection done if you suspect mold in your home.
The most effective way to get rid of pests is to hire a professional exterminator. You can also use natural methods like peppermint oil or diatomaceous earth.
Possible reasons for high electric bills include using outdated appliances, poor insulation, or leaving electronics plugged in when not in use.
Low water pressure means that the water in your home is not flowing with the desired force and could be a sign of a clogged or broken pipe.
You can try using a plunger or a drain snake. If those do not work, you may need to call a plumber for professional help.
A circuit breaker can trip due to overloading, a short circuit, or a ground fault.
Insulating your pipes and leaving them dripping during extremely cold temperatures can help prevent them from freezing.
It could be a sign of a refrigerant leak or an issue with the thermostat. It is best to have a professional inspect and repair your HVAC system.
Signs of a damaged roof include missing shingles, water stains on the ceiling, and algae or moss growth. It is best to get a professional inspection for an accurate assessment.
Sediment buildup or a faulty heating element can cause water heaters to make unusual noises. A plumber can diagnose and fix the issue.
Check if the outage is only affecting your home or the entire neighborhood. If it is just your home, check the circuit breaker and contact your power company if needed.
It is recommended to have your chimney cleaned and inspected once a year to prevent potential fire hazards.
Hard water contains high levels of minerals, such as calcium and magnesium, which can cause scaling and leave spots on dishes.
Low refrigerant levels, a dirty air filter, or a malfunctioning compressor could be the cause. A professional AC technician can diagnose and fix the issue.
Make sure it is plugged in, reset the disposal by using the reset button, and manually turn the blades to dislodge any clogs. If none of these work, it may need to be replaced.
Caulking and weatherstripping around windows can help reduce drafts. If the issue persists, you may need to upgrade to energy-efficient windows.
A clogged lint trap, damaged heating element, or a faulty thermostat could be the cause. It is best to have a professional dryer technician diagnose and fix the issue.
If your home was built before 1980, it may have asbestos insulation. A professional asbestos inspector can test for asbestos and recommend safe removal if necessary.
A faulty flapper valve or a clog in the toilet's drainage system could be the cause. A plumber can diagnose and fix the issue.
Keep gutters clean, grade the soil away from the foundation, seal any cracks in the basement walls, and install a sump pump if necessary.
A clogged drain hose, pump, or filter could be the cause. You can clean or replace these parts, or contact a dishwasher repair technician for help.
Signs of foundation issues include cracks in walls or floors, doors and windows that are difficult to open or close, and sloping floors. It is best to have a professional inspect and repair any foundation problems.
Radon is a colorless, odorless gas that can seep into homes through cracks in the foundation. It is a known carcinogen and should be tested for and mitigated if found in high levels.
Replace the batteries in the smoke detector and test it. If the beeping persists, the detector may need to be replaced.