The Tello drone is a small, affordable and beginner-friendly quadcopter designed for indoor and outdoor use.
Press and hold the power button on the side of the drone until the LED lights turn on.
Make sure the battery is fully charged and the power button is pressed and held long enough. If the issue persists, try replacing the battery.
Use the included USB cable to connect the Tello drone to a power source, such as a computer or a power bank.
Make sure the USB cable is properly connected to both the drone and the power source. If the issue persists, try using a different USB cable or power source.
Turn on the Tello drone and enable Wi-Fi on your phone. Then, open the Tello app and select the drone from the list of available Wi-Fi networks.
Make sure the Wi-Fi network is selected correctly and the password is entered correctly. If the issue persists, try restarting the Tello drone and your phone.
Use the virtual joysticks on the Tello app to manipulate the movements of the drone.
Check the Wi-Fi connection between the Tello drone and your phone. If the connection is strong, try recalibrating the drone or restarting the app.
Swipe on the virtual joystick in the desired direction on the Tello app.
Make sure the Tello drone is flying at least 3 feet off the ground and there is enough space for the flip to complete.
Connect the Tello drone to the Tello app and follow the on-screen instructions for updating the firmware.
Check that your phone meets the minimum system requirements for the Tello app. If it does, try closing other apps and restarting your phone.
Press and hold the power button for 5 seconds until all the lights on the drone turn off.
Ensure the battery is removed and check that the power button is pressing and holding for the full 5 seconds. If the issue persists, try charging the battery and resetting again.
In the Tello app, go to the settings and select "calibrate". Follow the on-screen instructions to calibrate the drone.
Make sure the drone is on a flat surface and there is no interference from magnetic objects. If the issue persists, try recalibrating in a different location.
Gently pull the propellers up and off the motor shafts, then push the new propellers firmly onto the shafts.
Check that the propellers are firmly attached and there is no debris obstructing their movement. If the issue persists, try restarting the drone.
Make sure the propellers are spinning properly and there is no damage to them. Try recalibrating the drone and adjusting the trim settings using the Tello app.
Check that the battery is fully charged and there is no damage to the propellers or other components. Calibrate the drone and fly in an open area without any obstructions.
Open the Tello app and select the drone's battery icon on the bottom of the screen.
Ensure the Tello drone is not flying in windy conditions and limit the use of the camera, as they both can drain the battery faster. If the issue persists, try replacing the battery.
Make sure the drone and phone are in close proximity and the Wi-Fi connection is strong. Try restarting both the drone and the app.
Check the Tello website for any known issues or contact customer support for further assistance.
Error messages can indicate a variety of issues. Check the Tello website or contact customer support for more information on specific error codes.